Momama Intelligent Bottle Warmer – Baby Pink

Momama Smart Milk Warmer makes feeding your baby on the go and during the night easy and convenient with 3 temperature modes and a rapid heat transfer design. Momama aims to bring technology closer to moms and dads, allowing babies to enjoy milk at the ideal temperature anytime, anywhere. Safe and stress-free, high-quality yet affordable, convenient without hassle.

PRODUCT DESCRIPTION:

• 100% Genuine from Momama
• High-quality product

✓ Compatible with 80% of bottles on the market
✓ Compact and lightweight
✓ Easy to carry and use
✓ Extended warming with 3 temperature control modes, lasting up to 6 hours
✓ Food-grade stainless steel heating plate with silicone cap
✓ Wireless charging via Type-C cable

PRODUCT SPECIFICATIONS:

• Capacity: 150g
• Product dimensions: 70x70x70mm
• Input voltage: 5V
• Maximum power: 24W
• Battery capacity: 5000mAh
• Dispensing capacity: 1 scoop (8-10g)
• Net weight: 342g

USAGE AND CLEANING INSTRUCTIONS:

Steps for use:

1. Fill the baby bottle with clean water.
2. Place the warmer upside down, and properly attach the warmer to the baby bottle.
3. Press and hold for 2 seconds to power on.
4. Press the button once to select the desired temperature.
5. Heat for 8-16 minutes.
6. Keep warm by maintaining a consistent temperature.

Notes:

• The warmer can maintain the solution's warmth for 2-6 hours after a full charge.
• Actual warming duration depends on storage environment and other factors.

Cleaning Instructions:

1. Turn off the device before cleaning.
2. Disconnect the USB cable.
3. Press and hold for 2 seconds to power off.
4. Clean and dry stainless steel parts with a soft cloth.

Important: Do not submerge the device in water. Ensure the waterproof seal is properly secured during cleaning.

Powder dispenser:

• Detach the dispenser cap, body, spout, and output control parts.
• Wash with water and boil to sterilize.

Descaling Instructions:

1. Mix white vinegar with cold water to descale the warmer.
2. Run the warmer for 30 minutes with the solution.
3. Leave the solution in the warmer until all residue dissolves.
4. Clean and thoroughly dry stainless steel parts.

Note:

• Use citric acid-based descaling agents. Avoid other descaling agents.

COMPATIBILITY WITH BOTTLE TYPE